Welcome, Please log in here


Additional Photos (Click to view Larger)

For Immediate Answers Contact:
Greg Gibson
(800) 374-5009 ext. 318
Intl. +1 (704) 841-2001
Email Me

If not available, try his/her backup:
Carlos Rossi at ext ...317

EXF #:   WM-010498   Sold!
Brand/Model:   ELUMATEC SBZ 150
Year of Mfg.:   2005
Condition:   As Is Condition  
Elect./Voltage:   480 V, 60 Cy, 3 Ph.
Appr. Repl. Cost:    495,000
Price:   $  79,300   USD     (Convert)
Financing:    1,585/Mo.
For Instant Communication, Click Here
ELUMATEC SBZ-150 CNC Profile Machining Center - 12 Meter 

5-Axis Profile Machining Center designed for economical and efficient machining of PVC, aluminium and thin-walled steel profiles. All operations, such as routing, drilling, tapping, thread milling, notching and sawing, are performed while the profile bar is stationary to protect the profile surfaces.

Versatile 6-sided machining from below with an angle head and operator software with graphic 3D display of workpieces. (2) Separate working zones enable machining in shuttle operation. The tooling magazine can be equipped with (9) standard tools, five special tools (angle routing head and and special cutters) and one saw blade

Max. machining length with profile end machining, 11,900 mm (468")
Max. machining length without profile end machining, 12,220 mm (481")
Traverse X-axis: 11900 mm (468") / V max. 70 m/Min (230 FPM)
Traverse Y-axis: 1000 mm (39") / V max. 40 m/Min (131 FPM)
Traverse Z-axis: 630 mm (25") / V max. 40 m/Min (131 FPM)

A-axis pivoting angle: +/–110°, user programmable in 1/10° steps
C-axis rotating +/–182°, user programmable in 1/10° steps
Max. cutting tool dia: 100 mm (3.94")
Max. disc milling cutter dia: 100 mm (3.94")
Max. saw blade dia: 400 mm (15.75")
Max. Spindle speed: 24,000 RPM

Equipped with:

  Control Techniques UNIDRIVE spindle drive

  Tool changer for (9) tools

  HSK-63F Tool holders

  5-axis FERROCONTROL controller for 3D machining, 15" Flat screen display, USB ports and network connection 

  Touch Screen Windows operating system

  Light Barrier for operator protection

  (4) Horizontal Material Clamps

  Pulsed Coolant System

  Barcode scanner

  Automatic length measuring

  Automatic clamping device with collision detection

  Tool holder set, holder for endmilling tool

  Rotation in the head for angle head

  Tool place for angle head

Dimensions: 13500 x 3350 x 2700 mm (531" x 132" x 106")
Weight: 4900 kG (10,800 Lbs)

NOTE: The machine is in good operating condition but needs service & a few new parts replacements as reflected in the price. Ready for immediate shipment. 
400 volt 3 phase, but includes a transformer that steps down from 480 volt
Seller stated Known Issues: Plastic compressed air tubes have become brittle and recommend replacing; Gas springs for safety hood need replacing; Cat track is worn and wiring insulation badly cracked and recommend replacing entire cat track

NOTE: EX-FACTORY’s Logistic Department is experienced and setup to provide “Full Service Logistics” to your Plant Door.


    Region: MIDWEST (Click for Regional Map)
    Special Note: Bargain
    Comment: Aggressive price on this large ELUMATEC...needs a few upgrades!
    *Dimensions: Available From Product Manager
    *Weight: Please Call
    Written By: Greg Gibson
    *Dimensions & Weight data are based on 3rd party information and could be incorrect; please verify & confirm if accurate dimensions & weight are required.
    My Account